The world's smallest & toughest waterproof Titanium flashlight. It's smaller than 1 inch!
This post is for backers only. Please visit Kickstarter.com and log in to read.
This post is for backers only. Please visit Kickstarter.com and log in to read.
This post is for backers only. Please visit Kickstarter.com and log in to read.
Hi everyone,
As many of you have already received your Subs, we’d like to point out a few things that are coming up. This is a lengthy update in which we will address:
1 - Which batteries you need
2 - How to get set up with your Sub
3 - How you can get some more
4 - How to track your Sub shipment
You may have seen that on some of the Titanium Subs, the packaging mentions AG3 batteries instead of AG2 batteries.
We sent out an update about this to ensure we'd mentioned it but we'd like to reiterate that the Subs take three AG2 batteries and not AG3.
The reason why it is mentioned on the Titanium packaging is that we had already printed and produced much of the packaging before we changed the design and it would be a huge waste to do all of that again, especially as we're trying to reduce our carbon footprint as much as we can.
You can find a rolled up instructional paper inside the battery compartment which details how to put the batteries in your Sub which details AG2 specifically.
--
How to set up your Sub for maximum performance
Step 1 - Open out the Sub and ensure the LED and spring are on one side and the hoop end and silicon battery holder are on the other side.
Step 2 - Remove the silicon battery holder from the hoop end of the Sub, then remove the instructions from the battery holder.
Step 3 - Insert 3 x AG2 batteries into the battery holder as mentioned in the instructions you found on step 2. Recycle the instructions paper as you now know how to put in the batteries.
Step 4 - Insert the battery holder back into the loop end with the visible side slightly covered by the silicon (it's there to prevent short circuiting so put it in as it says to). Ensure the LED and Spring are on the other end.
Step 5 - Screw together the Sub until it is at its tightest - leaving virtually no gap - it might be a little hard to do that. (If you're unable to get the thread to align and close, remove the LED from the other side and cut off a little bit of the metal leg that sticks out and repeat this step).
Step 6 - Bask in the brightness of the Sub and then slowly unscrew the Sub until the light goes out - ensure that when you unscrew it the majority of the outer silicon ring isn't visible (as that's one of the things that keeps it in place).
Step 7 - Put it on your split ring and enjoy!
Step 8 - (optional) - leave us a comment telling us how it went.
We hope these instructions were detailed enough to subvert any issues that could arise during the setup but if you're still unsure, fire us a message on the comments, KS messages or just classic email at: [email protected].
-
We're happy when you're happy, so when you need more Subs for your family and friends who think its super awesome, you can gift them a few more using our super secret special perk for our favourite backers (which you can only get at this link):
That's three Subs (including Titanium ones)
https://www.indiegogo.com/projects/sub-the-world-s-tiniest-ti-torch?secret_perk_token=0b3f3b72
-
If you're having trouble with the link we sent you in your email, just grab the tracking number - you can find it on the page that the shipping email directed you to - and just pop that into a website called 17track.net to get the latest up to date tracking info for your Sub.
Please note: If you're an Express Shipping backer, you should have received a dedicated email to your Kickstarter email so check there first!
-
That's all from us now, we hope you come to love your Sub as much as we do!
Best wishes,
Malboro & Kane
These cool kids with their Silver lined Boxers are still funding, so if you want to grab a pair you should get to it soon - we've just told them to add another 48 hours to their Early Birds so grab 'em while they're hot!
With two successful campaigns under their belt and plenty of great comments, this is a campaigner like us who actually delivers and shows love to their backers.
Here's a link to the campaign:
https://www.kickstarter.com/projects/beclothed/silverboxers-the-worlds-smartest-boxers?ref=cqjxo1
Just a note: contrary to what the link suggests, they have women's undies they added to the campaign!
This post is for backers only. Please visit Kickstarter.com and log in to read.